Jump to content

06FEB22 | Saint Helens to The Vale

    

VFR_AEDT.thumb.jpg.a098ff93d986d19846edb4e3d4a22d85.jpg

Simulation Date/Time: Current date set to daylight.

Weather: Real World / Fair weather if real world is unsuitable for VFR operations.
If not using live weather, please be mindful of others who are using live weather and will be taking off and landing into the wind.

Distance: 123 nm

Est Flight Time: Approx 75 min

Aircraft: Cessna 172 or similar aircraft capable of 100-110 kias..

Altitude: Remain in Class G airspace. See waypoint notes below

Flight plan

File as: YSTH YFMA AVCA CJN YVAF YLGD CES DEL YDEL YVAL

GPS flight plan is available for FSX/P3D .pln, MFS2020 .pln, X-Plane .fms and Little Navmap.

Navigation: Pilots are encouraged to navigate visually. For those less familiar the GPS flight plan is the recommended method of navigation.

Communications

Australia uses CTAF (Common Traffic Advisory Frequency) for radio comms at uncontrolled airfields. During an event, Pilots are requested to broadcast intentions on the published CTAF. Pilots should also be aware that it is a VATSIM CoC (Code of Conduct) requirement that all pilots at uncontrolled airfields should monitor UNICOM on 122.800. Pilots should ensure that at least one of their radios (COM 2 being the most likely) is tuned to receive UNICOM transmissions in addition to transmitting and receiving on the published CTAF.

Pilots also should read this post regarding the implications of using VATSIM UNICOM for CTAF. It provides some insight into potential pitfalls for the unwary when monitoring 122.80 in a CTAF environment.

 

Scenery

Due to the plethora of simulation platforms now being used, scenery is left to the discretion of each pilot. Updated X-Plane 11 scenery is available for The Vale in OzXP and for other airports.

 

Flight details

  • SAINT HELENS [YSTH] Takeoff
    elev: 158
    rwy: 08/26 gravel
    CTAF: 119.1


    Tune DME to Launceston VOR/DME (LT 112.6)
     
  • HENDERSON POINT overfly - visual along the coast
     
  • ST MARYS overfly - visual along Esk Main Road
     
  • MALAHIDE [YFMA] T&G - visual along Esk Main Road
    elev: 800
    rwy: 10/28 grass
    CTAF: 126.7

     
  • AVOCA {AVCA] overfly visual along Esk Main Road

    Not above 4500 ft within 25 DME LT.
    Not above 3500 ft within 20 DME LT.
     
  •  CONARA JUNCTION [CJN] overfly not above 3500 ft - visual along Esk Main Road
     
  • VALLEY FIELD [YVAL/AU84] T&G - visual along Valleyfield Road
    elev: 532
    rwy: 01/19 14/32 grass
    CTAF: 126.7

    Not above 2500 ft within 16 DME LT.
    Not above 1500 ft within 11 DME LT.

     
  • LONGDOWN [YLGD] T&G - visual along Mount Joy Road
    elev: 522
    rwy: 15/33 grass
    CTAF: 126.7

     
  • CRESSY [CRS] overly not above 1500 ft - visual along the Macquarie River

    Once past Cressy, not above 8500 ft.
     
  • BRACKNELL overfly - visual along Elphinstone Road
     
  • WHITEMORE [YWHI] T&G - visual along Oaks Road
    elev: 612
    rwy: 11/29 grass
    CTAF: 126.7

     
  • DELORAINE [DEL] overfly - visual along Osmaston Road
     
  • DELORAINE [YDEL] T&G - visual along Emu Bay Road
    elev: 927
    rwy: 14/32 grass
    CTAF: 126.7

     
  • RAILTON overfly - visual along the Bass Highway or railway
     
  • SHEFFIELD overfly - visual along Sheffield Road
     
  • THE VALE [YVAL] Land - visual along Claude Road
    elev: 723
    rwy: 06/24 grass [Preferred landig direction RWY 24]
    CTAF: 126.7

Chart

YSTH-YVAL.thumb.png.b5a32cfb25d6f540aa1a4a6623d7212b.png

 Share


Recommended Comments

Hi David

Loaded in for this event but for some reason my xPilot client is not working properly since moving to VatSim Velocity...flight plans arent showing up either !! I guess that's why is still in Beta........finally managed to hear everyone at The Vale.....oh well onto the next one..

 

Edited by Jason Cross
Link to comment
On 2/6/2022 at 7:31 PM, Jason Cross said:

Loaded in for this event but for some reason my xPilot client is not working properly since moving to VatSim Velocity...flight plans arent showing up either !! I guess that's why is still in Beta........finally managed to hear everyone at The Vale.....oh well onto the next one..

You need to prefile your flight plan through the VATSIM site: https://my.vatsim.net/pilots/flightplan

Your callsign in the flight plan and when you connect need to be identical. For example if you file for the callsign VHABC and connect as ABC or VH-ABC it won't pick up the flight plan.

Link to comment

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...