-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Bertus Oosthuizen
-
-
Thanks Harrison , I will surely call for help earlier next time .
Eoin ,
I have high regard and appreciation for all your hard work to make it a LOT easier to install and work with ES . I started off with to learn VRC from scratch because I wanted to try it out as well . After that I installed ES 3.1d with the excellent VATPAC package it worked very well until I did something wrong without knowing what it was and when it occurred . I re-installed it a couple of times by means of the package ,but the problem appeared again . I thought there was a hidden file somewhere that the un-installer missed or that the TAATS module clashed with some settings on my computer . I then installed ES 3.2 from scratch and set it up . Now that I know what the problem is I can go back and try it again .
Thanks for your interest and advice .
-
Hi Harrison ,
Thanks a million , I could correct the problem by means of your clear and precise instructions .
You know ,I always know I have a good problem on hand when a good IT specialist can quickly and efficiently correct it with only one or two strikes of the IT sword ,haha !
I always like to find the solution by reading the manuals . The profit is normally good .The problem comes in when it is mixed with vague or even incorrect Google advice . Google is helpful ,but not always .With this problem I followed irrelevant or incorrect advice on Google and stayed with it . It prevented me from implementing a straight forward solution . That is why I have such great appreciation for IT experts ,they know how to avoid obstacles . They don't see cluttered ,they can quickly focus on the important and relevant stuff .
I should have asked earlier for advice . Thanks for helping me in a great and kind way . I greatly appreciate your time and effort to do so .
Kindest Regards .
PS I moved the center point to the airport .It was too far to the right . The aerodrome was on the outside . The point where the traffic disappeared was right on the yellow border of the visibility area . I must have moved it by my attempts to correct the problem . The traffic disappeared at 50 nm and appeared again when the range were set to 60 nm. I guess ES interpret it as an APP vis then with a greater visibility range allocated the aerodrome were included again . Not sure ,my guess only . In my search I also found this link ,which made me to think in terms of a much more complicated solution :https://forums.vatsim.net/viewtopic.php?f=7&t=56924
-
Hi ,I need help please . Aircraft in flight and on the ground disappear when the range is set to 50 nm as required for the TWR position . If I switch to OBS and extend the range to 100 nm the aircraft appear on the radar screen again . When the a/c disappear they sometimes also disappear from the inbound and departures lists in ES .
Euroscope : Aircraft in flight and on the ground disappear
in Controller Clients
Posted
Took up Eoin's advice and installed the VATPAC ES 3.1d package again . Had a test run and it is working very well . I am still learning more and more every day . Thanks to everyone for the good advice received .