Jump to content

Jandakot to Merredin

    

Event Details

This flight take place Western Australia. Note The destination airport of Merredin is not a default FSX airport and needs to be installed. Refer to the scenery section at the bottom of these flight details.

Simulation Date/Time : Current date set to daylight.

Weather : Real World / Fair weather if real world is unsuitable for VFR operations.

Distance :140 nm

Est Flight Time : approx 75 mins

Aircraft :Single or engine piston aircraft such as Cessna 172 or similar capable of 105 to 125 kias.

Communications : Australia uses CTAF (Common Traffic Advisory Frequency) for radio comms at uncontrolled airfields. VATSIM pilots connecting to the network using FSCOPILOT/FSINN can install an additional file that provides the ability to tune the CTAF frequency and make voice announcements to other pilots on frequency. These files can be obtained via this link.

Altitude : Below Perth Class C steps

Flightplan

File as : YPJT ARE CDM MUE YQDG YBRO YMDN

GPS Flightplan is available for FSX and X-Plane FMS and also provided is the original Plan-G flightplan for those that find this useful all enclosed within a Zip archive.

Navigation : Pilots familiar with the area can navigate visually, for those less familiar the accompanying GPS Flightplan is the recommended method of navigating the flight plan.

Communications

Australia uses CTAF (Common Traffic Advisory Frequency) for radio comms at uncontrolled airfields. Now that VATSIM has introduced AFV (Audio For VATSIM) CTAF can now be used across all VATSIM approved pilot clients. Pilots are requested to tune to the published frequency as detailed in the flight details for an event when operating in or around an aerodome to make and monitor CTAF broadcasts. Pilots should also be aware that it is a VATSIM COC (Code of Conduct) requirement that all pilots at uncontrolled airfields should monitor Unicom (Australia 122.80). It is highly recommended that pilots ensure that at least one of their "on board" COM radios (COM 2 being the most likely) is tuned to receive unicom transmissions in addition to transmitting and receiving on the published CTAF frequency. Please Note. All pilots should also be vigilant regarding the receipt of text on both unicom and CTAF. If it is discovered there is a pilot participating that is unable to receive voice transmissions, pilots should arrange to also broadcast via text to ensure those pilots without the benefit of voice is able to receive appropriate broadcasts. VATSIM provides an update guide for getting AFV working on each of the approved pilot clients.

Recommended Scenery

FSX / P3D

X-Plane 10/11

Flight Details

  • JANDAKOT [YPJT] Takeoff
    elev : 99
    rwy : 12/30 06R/24L 06L/24R asphalt
    CTAF : 118.10
    NDB : JT JANDAKOT 281.0
    NOTE if TWR Active use squawk code 3000 then once clear of the zone (Tonkin Highway) 1200, otherwise 1200

  • ARMADALE [ARE] Overfly - H-114° D-7

  • CANNING DAM [CDM] Overfly - H-097° D-6

  • MOUNT DALE [MUE] Overfly - H-079° D-9

  • BEVERLEY [YBEV] T&G - H-090° D-33
    elev : 685
    rwy : 08/26 grass
    rwy : 16/34 dirt
    CTAF : 122.80

  • QUAIRADING [YQDG] T&G - H-075° D-25
    elev : 796
    rwy : 08/26 05/23 dirt
    rwy : 01/19 ???
    CTAF : 122.80

  • BRUCE ROCK [YBRO] T&G - H-080° D-36
    elev : 947
    rwy : 25/07 bitumen
    rwy : 18/36 13/31 dirt
    CTAF : 122.80

  • MERREDIN [YMDN] Land - H-026° D-24
    elev : 1263
    rwy : 10/28 17/35 asphalt
    CTAF : 120.10

VTC Chart

39818739562_65f99c4237_o.jpg

WAN Chart

24980361037_ffb45e2213_o.jpg

 Share


Recommended Comments

There are no comments to display.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...