* DST * Bathurst to Canberra - VFR Operations - VATPAC | VATSIM Australia Pacific Jump to content

* DST * Bathurst to Canberra

    

VFR Operations
Russell Diehl

Event details


26418252487_e62e5953f6_o.png

Event Details

Simulation Date/Time : Current date set to daylight.

Weather : Real World / Fair weather if real world is unsuitable for VFR operations.

Distance : 176 nm

Est Flight Time : approx 85 mins

Aircraft : Single or twin engine aircraft such as Beechcraft Baron, Mooney Bravo or similar capable of 155 to 185 kias.

Altitude : Remain clear of Canberra CTA steps once clear of the airport

Flightplan

File as : YBTH YORG YCWR YYNG YHAE ASST MMM YSCB

GPS Flightplan is available for FSX and X-Plane FMS and also provided is the original Plan-G flightplan for those that find this useful all enclosed within a Zip archive.

Navigation : Pilots familiar with the area can navigate visually, for those less familiar the accompanying GPS Flightplan is the recommended method of navigating the flight plan.

Communications

Australia uses CTAF (Common Traffic Advisory Frequency) for radio comms at uncontrolled airfields.

FSCopilot/FSInn

VATSIM pilots connecting to the network using FSCOPILOT/FSINN can install an additional file that provides the ability to tune the CTAF frequency and make voice announcements to other pilots on frequency. These files can be obtained via this link.

 

Swift

Swift is a recent VATSIM Pilot Client alternative now released to the public as a beta release candidate. This pilot client is a one fits all alternative and will work with FSX, P3D V3/V4 and XPlane in either 32 bit Windows or 64 bit Windows, Mac and Linux. This client, once installed and configured (not for the faint of heart - some guidance can be found in this video tutorial for those with X-Plane on Windows x64), also provides a capability for pilots to designate a private voice channel to allow communication with other pilots in the same voice channel. However, to do this requires a frequency over ride to be set allowing the client to ignore the set frequency instead providing text entry into a text box. Into this box the name of the voice room needs to be entered to enable voice communication. A voice room is typically in the form of "some.server.org/<Airport ICAO>". The server component is ALWAYS "rw1.vatpac.org". So this week's departure would use "rw1.vatpac.org/<Airport ICAO>".
For airports without an airport ICAO it is typical to use VATPAC VFR Virtual voice room acccessed using 131.25 in FSINN. The equivalent for SWIFT is "rw1.vatpac.org/virtualvfr".

Recommended Scenery

FSX / P3D

X-Plane 10/11

Flight Details

* NOTE Frequency 131.25 - "rw1.vatpac.org/virtualvfr"

  • BATHURST [YBTH] Takeoff
    elev : 2435
    rwy : 17/35ns asphalt
    rwy : 08/26 gravel
    CTAF : 127.35
    NDB : BTH BATHURST 383.0

  • ORANGE [YORG] T&G - H-262° D-26
    elev : 3112
    rwy : 04/22 11/29 asphalt
    CTAF : 119.00

  • COWRA [YCWR] T&G - H-209° D-37
    elev : 973
    rwy : 15/33 asphalt
    rwy : 03/21 grass
    CTAF : 126.70
    NDB : CWR COWRA 299.0

  • YOUNG [YYNG] T&G - H-207° D-31
    pos : CB R-310° D-77.5
    elev : 1267
    rwy : 01/19 asphalt
    CTAF : 126.70

  • HARDEN [YHAE] T&G - H-148° D-20
    pos : CB R-305° D-58.5
    (Scenery not depicted in P3D)
    elev : 1432
    rwy : 8/26 dirt
    CTAF : 122.80 (FSINN 131.25)

  • YASS TOWNSHIP [ASST] Overfly - H-112° D-31 Not above A6500
    pos : CB R-320° D-29.3

  • MURRUMBATEMAN [MMM] Overfly - H-132° D-9 Not above A5500
    pos : CB R-323° D-20.3
    IF Canberra Approach/Centre is active, contact them with inbound details. Do not proceed until cleared

  • CANBERRA [YSCB] Land - H-146° D-22
    elev : 1886
    rwy : 12/30 17/35 asphalt
    CTAF : 118.70
    NDB : CB CANBERRA 263.0
    VOR/DME : CB CANBERRA 116.70

Chart

48797229591_2742075e6e_o.jpg

Sign in to follow this  

Recommended Comments

There are no comments to display.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×