Jump to content

14FEB2024 World Discovery Geneva LSGG VFR

    

Event details

 Share

0900Z.jpg.18f44db5046578e612afdbcf0463cd21.jpg

This weeks flight for 14th February 2024 takes us to Switzerland and is a circuit of Lake Geneva departing from and arriving back to Geneva (LSGG).

Flight created by David Bromage

It is common for this zone to be controlled so it is recommended to refer to the following for instruction on VFR flights departing and arriving.

https://ch.ivao.aero/download/documents/LSGG_ATMM.pdf

Refer section 7. VFR flights

I have tried with my limited knowledge to provide some guidance hereunder however you are the pilot in control not me😁

Departure:  As we are flying clockwise our departure will ultimately be to the north east so if using Rwy 22 ATC is likely to instruct departure via waypoint W (Whiskey) or if using Rwy 04 ATC is likely to instruct waypoint N (November) . Irrespective of which waypoint advise ATC when reaching either outbound waypoint.

Arrival: As we are arriving from the south east we must report our position well before reaching waypoint E (Echo) at which point ATC will advise how to join the circuit and left or right. If ATC available do not enter without clearance.

NB: Flight over the city and/or airfield must be minimum 3,000ft and Maximum 3,500ft unless instructed otherwise.

Route Details:

LSGG N LSGP follow edge of lake LSGB follow plan route to LFHZ follow A40 to LFLI  Report intentions at waypoint E and follow ATC instructions if any. If no ATC then use  left hand circuits for Rwy 04 or right hand circuits for Rwy 22.

Aircraft: Capable of 150 kias

Comms: Tune Radio to 122.80MHz - Unless Advised by ATC or further detailed hereunder

Weather: Real time weather, fair weather if conditions are not suitable for VFR Flying.

Flight Plan:(LSGG-LSGG)< Just click on this link for GPS Flight Plans

 

 

310189496_LSGGReportPoints.JPG.e7708f8f36e292a95e29ed8d8cdcc7d6.JPGimg20231229_16124475.thumb.jpg.ab39b5dc18df6245f27d7997c229d0b7.jpg

LSGG-LSGG.JPG

 Share


Recommended Comments

There are no comments to display.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...