Event created by Russell D - 1104622
Event Details
Simulation Date/Time : Current date set to daylight.
Weather : Real World / Fair weather if real world is unsuitable for VFR operations.
Distance : 130 nm
Est Flight Time : approx 75 mins
Aircraft : Single engine aircraft such as Cessna 172 or similar capable of 105 to 125 kias.
Altitude : Once clear of Gold Coast CTA remain below the Brisbane and Gold Coast CTA steps
Flightplan
File as : YWCK YCHB YSPE KYOGLE YXNU SBK YBCG
GPS Flightplan is available for FSX, P3D, FS2020 as a 'pln' file and X-Plane as an 'fms' file. The original Plan-G flightplan is also included for those that find this useful. These are all enclosed within a Zip archive.
Navigation : Pilots familiar with the area can navigate visually, for those less familiar the accompanying GPS Flightplan is the recommended method of navigating the flight plan.
Communications
Australia uses CTAF (Common Traffic Advisory Frequency) for radio comms at uncontrolled airfields. Now that VATSIM has introduced AFV (Audio For VATSIM) CTAF can now be used across all VATSIM approved pilot clients. Pilots are requested to tune to the published frequency as detailed in the flight details for an event when operating in or around an aerodome to make and monitor CTAF broadcasts. Pilots should also be aware that it is a VATSIM COC (Code of Conduct) requirement that all pilots at uncontrolled airfields should monitor Unicom (Australia 122.80). It is highly recommended that pilots ensure that at least one of their "on board" COM radios (COM 2 being the most likely) is tuned to receive unicom transmissions in addition to transmitting and receiving on the published CTAF frequency. Please Note. All pilots should also be vigilant regarding the receipt of text on both unicom and CTAF. If it is discovered there is a pilot participating that is unable to receive voice transmissions, pilots should arrange to also broadcast via text to ensure those pilots without the benefit of voice is able to receive appropriate broadcasts. VATSIM provides an update guide for getting AFV working on each of the approved pilot clients.
Pilots also should read this post regarding the implications of using VATSIM UNICOM for CTAF. It provides some insight into potential pitfalls for the unwary when monitoring 122.80 in a CTAF environment.
Recommended Scenery
FSX / P3D
- ORBX Australia
- ANTS AUSSIE AIRPORTS
- OZX 3.5 AU Scenery
- OZX Libraries 1.2 (required for all OZX scenery)
X-Plane 10/11
Flight Details
-
WARWICK [YWCK] Takeoff
elev : 1526
rwy : 09/27 asphalt
CTAF : 127.85 -
CHERRABAH [YCHB] T&G - H-145° D-19
(Scenery not depicted in P3D)
elev : 2199
rwy : 11/29 dirt
CTAF : 122.80 -
STANTHORPE [YSPE] T&G - H-194° D-13
elev : 2934
rwy : 08/26 asphalt
CTAF : 126.70 -
KYOGLE Overfly - H-079° D-54
-
NUMINBAH [YXNU] T&G - H-011° D-29
(Scenery not depicted in P3D)
elev : 436
rwy : 15/33 dirt
CTAF : 122.80 -
SPRINGBROOK [SBK] Overfly - H-108° D-3
GOLD COAST INBOUND REPORTING POINT - If ATC active contact tower/app to request clearance and include the latest ATIS identifier in the call -
GOLD COAST [YBCG] Land - H-071° D-13
elev : 21
rwy : 17/35 asphalt
rwy : 14/32 bitumen
CTAF : 118.70
VOR/DME : CG GOLD COAST 112.30
NDB : CG GOLD COAST 278.0
Local VNC
Gold Coast VTC